|
The AutoPot 1 PotKit is a single 15 litre pot and tray, which has a separate cavity for the AQUAValve. The 1 Pot unit has the added advantage of providing the user with 2 choices of water depth, 25mm and 40mm and also the advantage of a built in overflow for improved operation outdoors.
The 1 Pot kit is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the constant even watering and feed they receive via the AQUAValve.
For detailed instructions on how to set up, extend and supercharge your 1 PotKit please click here.
The Auto Pot 1 Pot Kit includes:
1 x 15 Litre Pot
1 x Tray and lid
1 x AQUAvalve
1.5m of 4mm Pipe
1 x SP6 Root Control Disk.
1x Marix Disc
Your AutoPot 1 PotKit can be directly attached to a 47 litre Auto Pot Reservoir (sold separately) or you can use any other tank you might have.
Also needed (sold separately):
1 x Auto Pot Filter (prevents particles clogging up the AQUAValve) - 1 filter does multiple Auto Pots
1 x SP6 Root Control Mat per pot.
Extending your Pot Kit
The AutoPot 1 and 2 Pot kits can be easily extended by using larger tanks, bigger supply pipe from the tank (13mm Hosepipe size) and 13mm - 4mm Tee connectors. A 13mm tap is placed at the end of the run so that the line can be flushed if required. Using a ball-cock in your tank will ensure you have a maximum head of water at all times. A rule of thumb is to re-fill your tank when half-empty, if you are unable to install a ball-cock. Always raise the tank two feet higher than the highest module.
|
